42-Inch Brushless DC Electric Motor Wall-Mounted Industrial Exhaust Fan(D42LP6E)

Need help?

Please contact us for assistance.

Add to Inquiry

View the product's document, video, and case study

Brief Introduction

Product introduction and features

X-shaped frame features high structural strength. The motor does not shake during operation.
FRP housing does not rust and is safer.
R-type pin is utilized in the shaft edge to prevent the blades from falling off, that further improves the safety level.
The frame is built with 304 stainless steel and aluminum alloy that features anti-rust, acid and alkaline resistance, aesthetic and durability. It also prevents rainwater from flowing into the motor.
304 stainless screws are fully utilized in the product.
Equipped with DC inverter motor that features IP66, higher efficiency and lower power consumption.
The fan blade is made of FRP material, Nylon-66 + 30% fiber. It features acid and alkaline resistance, un-deformability, and high rigidity.
FRP composite material housing with manual painted glass fiber. It features acid/alkaline resistance and high temperature durability.
Front: 38" shutter. Rear: metal grille.

Product Name	42-Inch Brushless DC Electric Motor Wall-Mounted Industrial Exhaust Fan
Product Model	D42LP6E
Rated Voltage	Single Phase/220V/60Hz/7.4A
Motor Parameters	1.5HP/16P/Class F/IP66
Power Consumption	910W
Fan Speed Control	Stepless Speed Regulation (with DC Motor Speed Controller)
Maximum Speed	660RPM
Maximum Air Volume	24,000 cubic meters/hour
Noise Level	≦74dB (measured at 3 meters from the fan)
Product Dimensions	106×106×Height 45 cm
Product Weight	37 kg
Suggested Retail Price	NT$26,800

Online Shopping Platform

Back Back UP

Ventilation principle and FAQ

Please check the FAQ here. If you cannot find the answer, please contact us.